- Contact info -
|
How to contact me
First of all: read the FAQ.
If you still got questions, have discovered a bug or just want to say something meaningful,
please contact me at .
I will usually respond within 24 hours.
|
- AsusTemspter FAQ - updated 2001-03-11 -
|
.
.
.
.
|
AsusTempster doesn´t work with my new shiny Asus-board?! Help me!.
AsusTempster works like a shell for the Asus dll-files. Therefore you need the appropriate
set of files for your board. The dll-files shipped with v1.20 and v1.50 comes from the
Asus PC Probe-package v2.11, so they may not work with your board.
This is a general fix:
1. Download and install a version of Asus PC-Probe (Maybe you got a cd shipped with your board? Then look there!)
from .
Check that it works with your temp-monitoring chip.
2. If it seems fine, copy all dll-files from the PC-Probe directory
and paste them in your AsusTempster directory overwriting existing files.
3. Start AsusTempster and see if it works now!
4. Since it it impossible for me to say what files are needed for a specific board, start off by
having all dll-files in the AsusTempster directory. If you want to clear up some space you can then
delte one dll-file after another while AsusTempster is running. The system will not allow you to delete
files that are in use, so you will only be able to delete files not needed. This way you will
end up with the minimal set of dll´s for your board! (It may be a good idea to back up the files before starting to delete them...)
** Be sure never to run PC-Probe and AsusTempster at the same time.
They will interfere. **
|
AsusTempster v1.50 doesn´t work with A7V or CUSL2. What do I do?.
This is beacuse the temperature chip on those boards differs
from the BX-based boards that AsusTempster was written for
in the first place. It may however be possible to fix it
anyway, several users have got it to work with both A7V and CUSL2.
You can try this:
1. Download and install the latest Asus PC-Probe (v2.12 or later)
from .
Check that it works with your temp-monitoring chip.
2. If it seems fine, copy all dll-files from the PC-Probe directory
and paste them in your AsusTempster directory overwriting existing files.
3. Start AsusTempster and see if it works now!
** Be sure never to run PC-Probe and AsusTempster at the same time.
They will interfere. **
|
I have v1.20 or v1.50 and everytime i turn on logging,
I get an errormessage saying that some path wasn´t found. My systems is using a U.S-type dateformat.
What´s this about?.
This issue was addressed in both v1.20 and the first v.150 and is the result of a bad date-conversion
from US-dateformat to swedish dateformat. Sorry about this... Download the v1.50 Fixed-EXE
or the complete updated v1.50 package from the
. This will fix it.
If you have installed the previous v1.50, just replace the old AsusTempster.exe with the v1.50 Fixed-EXE.
Please note that both these files are v1.50.
If you have v1.20, then uninstall it and install the updated v1.50 package.
|
I´ve set up my system to use large fonts and now
AsusTempster looks like crap. Can you fix this?.
Yes, but it will require a new version. If there´s a lot of users requesting this I may
code AsusTempster to sence the current font-size, but there´s no demand for this right now.
|
- About the Support-section
This page will gradually be expanded.
|
